bad allocation

For all the users of Twilight Render (V1 & V2), to ask questions and get started
Post Reply
GiorgiMelkadze3DArt
Posts: 280
Joined: Mon Feb 16, 2015 5:51 pm
OS: Windows
SketchUp: Sketchup 2020
Location: Georgia, Tbilisi
Contact:

bad allocation

Post by GiorgiMelkadze3DArt » Fri Aug 06, 2021 6:05 pm

Hello there, i am so sclose to finish another one work, but ther eis one problem i have never seen yet. i start render and it starts rendering very well, i left the computer turned on and when i came back, i swa the window of error ''bad allocation'' after some times it crashes. what is problem can you explain me? how solve this problem?

Fletch
Posts: 12895
Joined: Fri Mar 20, 2009 2:41 pm
OS: PC 64bit
SketchUp: 2016-2023
Contact:

Re: bad allocation

Post by Fletch » Fri Aug 06, 2021 10:33 pm

This is most likely due to running out of RAM memory. If the problem continues, may need new or more RAM.

GiorgiMelkadze3DArt
Posts: 280
Joined: Mon Feb 16, 2015 5:51 pm
OS: Windows
SketchUp: Sketchup 2020
Location: Georgia, Tbilisi
Contact:

Re: bad allocation

Post by GiorgiMelkadze3DArt » Fri Aug 06, 2021 11:30 pm

Yes, but i have many models and ther are more bigger in size then this one and twilight works perfect with them :?
i have 16 gb RAM, its not small :( i create this last one during 1 month hope i will find any way to render it.

Fletch
Posts: 12895
Joined: Fri Mar 20, 2009 2:41 pm
OS: PC 64bit
SketchUp: 2016-2023
Contact:

Re: bad allocation

Post by Fletch » Sat Aug 07, 2021 1:30 am

if you get this error, next time please look at the RAM usage at the time. If you have a lot of high resolution textures the RAM can be taken up.

It may be that there is a bad sector in the RAM. :!

GiorgiMelkadze3DArt
Posts: 280
Joined: Mon Feb 16, 2015 5:51 pm
OS: Windows
SketchUp: Sketchup 2020
Location: Georgia, Tbilisi
Contact:

Re: bad allocation

Post by GiorgiMelkadze3DArt » Sun Aug 08, 2021 7:38 pm

is it a RAM s foult? i see it first time. there where problems when Twilight can not render, it was saying that that render failed, but never happened same. it stops rendering near to 4-5 % ( 5-1000) i think there is an other problem :cry:

GiorgiMelkadze3DArt
Posts: 280
Joined: Mon Feb 16, 2015 5:51 pm
OS: Windows
SketchUp: Sketchup 2020
Location: Georgia, Tbilisi
Contact:

Re: bad allocation

Post by GiorgiMelkadze3DArt » Sun Aug 08, 2021 7:44 pm

error
Image

GiorgiMelkadze3DArt
Posts: 280
Joined: Mon Feb 16, 2015 5:51 pm
OS: Windows
SketchUp: Sketchup 2020
Location: Georgia, Tbilisi
Contact:

Re: bad allocation

Post by GiorgiMelkadze3DArt » Sun Aug 08, 2021 7:54 pm

naah, i try to upload error image but forum dont let me, i mean there is not button PLACE IN LINE

Fletch
Posts: 12895
Joined: Fri Mar 20, 2009 2:41 pm
OS: PC 64bit
SketchUp: 2016-2023
Contact:

Re: bad allocation

Post by Fletch » Wed Aug 11, 2021 4:13 am

You upload images all of the time, Giorgi, nothing on the forum has changed.

Try running diagnostic on the file.
Extensions>TwilightRenderV2>Diagnostic Report

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests