Studio Setup for Furniture

Show what you're working on, get feedback and help
Fletch
Posts: 11613
Joined: Fri Mar 20, 2009 2:41 pm
OS: PC 64bit
SketchUp: 2016-2021
Contact:

Re: Studio Setup for Furniture

Post by Fletch » Sun Mar 22, 2020 9:19 pm

Very nice. :^: :clap:
Glad to hear that it works.

Anyone who has installed the latest version of Twilight may have the preset sky setting for this HDR already in their Environment dialog - but only if you did not already have Twilight installed previously. This is because Twilight will not over-write your existing Preset Sky settings file.

Mike1158
Posts: 1043
Joined: Wed Aug 26, 2009 7:15 pm
OS: W10
SketchUp: V19

Re: Studio Setup for Furniture

Post by Mike1158 » Sat Apr 04, 2020 2:39 pm

Not furniture but similar idea. I quite like this one. The handles have a very low level light source inside.
Attachments
Mixer taps.
Mixer taps.
Mixer Tap 10 2 9 100p 1h 36m Ir 0 a R.jpg (60.62 KiB) Viewed 3989 times

Fletch
Posts: 11613
Joined: Fri Mar 20, 2009 2:41 pm
OS: PC 64bit
SketchUp: 2016-2021
Contact:

Re: Studio Setup for Furniture

Post by Fletch » Mon Apr 06, 2020 9:46 am

interesting. looks good, but the shadow/sun should be off in order to pure test the hdri

Mike1158
Posts: 1043
Joined: Wed Aug 26, 2009 7:15 pm
OS: W10
SketchUp: V19

Re: Studio Setup for Furniture

Post by Mike1158 » Mon Apr 06, 2020 12:10 pm

Good point, thick as today.

Mike1158
Posts: 1043
Joined: Wed Aug 26, 2009 7:15 pm
OS: W10
SketchUp: V19

Re: Studio Setup for Furniture

Post by Mike1158 » Mon Apr 06, 2020 12:48 pm

Corrected my mistake, sorry folks.
Attachments
Fixed, 28 minute render.
Fixed, 28 minute render.
Mixer Tap 10 3 9 30p 28m Ir 0 a R.jpg (61.77 KiB) Viewed 3974 times

Fletch
Posts: 11613
Joined: Fri Mar 20, 2009 2:41 pm
OS: PC 64bit
SketchUp: 2016-2021
Contact:

Re: Studio Setup for Furniture

Post by Fletch » Mon Apr 06, 2020 7:50 pm

:^: :gj:

Mike1158
Posts: 1043
Joined: Wed Aug 26, 2009 7:15 pm
OS: W10
SketchUp: V19

Re: Studio Setup for Furniture

Post by Mike1158 » Tue Apr 07, 2020 9:24 am

Thanks Fletch.

djcyph
Posts: 10
Joined: Wed Jan 22, 2020 4:29 am

Re: Studio Setup for Furniture

Post by djcyph » Wed Apr 14, 2021 4:27 pm

this is great!

any tips for something like my attached render where I guess the walls are blocking the studio light? I want the floor to be hit with light. I know 90 is recommended rotation, is there another I should try? Experimenting on my own and seems the same. Or is the only way to add actual lights? Oh I'm using the studio skp that was attached with modified "front-low" view.
Thanks!
Screen Shot 2021-04-14 at 12.20.31 PM (2).png
Screen Shot 2021-04-14 at 12.20.31 PM (2).png (4.63 MiB) Viewed 938 times

Fletch
Posts: 11613
Joined: Fri Mar 20, 2009 2:41 pm
OS: PC 64bit
SketchUp: 2016-2021
Contact:

Re: Studio Setup for Furniture

Post by Fletch » Wed Apr 14, 2021 11:05 pm

Try a large rectangular emitter plane above the stage.
make sure the plane is "facing" down into the stage area

try setting emit material to 500w/m2
Attachments
Untitled-2.png
Untitled-2.png (24.37 KiB) Viewed 931 times

Post Reply

Who is online

Users browsing this forum: Evennett and 18 guests