Low render preset
-
- Posts: 120
- Joined: Wed Apr 04, 2012 8:26 am
- SketchUp: 2018
- Location: Poland
- Contact:
Low render preset
So recently I've started to learn TR again... guess what... low render preset rocks !
Render time 410 sec.
Always thought that No. 09 is best option, but seems like i've underestimate all the others. Of course there are some limitation, but still such a nice picture with less than 10 minutes with postpro.
Render time 410 sec.
Always thought that No. 09 is best option, but seems like i've underestimate all the others. Of course there are some limitation, but still such a nice picture with less than 10 minutes with postpro.
Last edited by masloprojekt on Sat Jun 06, 2015 8:29 am, edited 1 time in total.
-
- Posts: 650
- Joined: Thu Sep 03, 2009 2:26 pm
- SketchUp: SU8 to SU2019 Pro
- Location: Adelaide, South Australia
- Contact:
Re: Low render preset
Nice result
Re: Low render preset
Due to reasons of time, most time i use preset low
Re: Low render preset
masloprojekt wrote:So recently I've started to learn TR again... guess what... low render preset rocks !
biggest noobie mistake is to jump to the higher presets before even trying out the "low" ones. For interiors like this one, "Low" should indeed be good.
-
- Posts: 120
- Joined: Wed Apr 04, 2012 8:26 am
- SketchUp: 2018
- Location: Poland
- Contact:
Re: Low render preset
That is totally my case. I think that is because in progressive you can "see" effects faster.Fletch wrote:biggest noobie mistake is to jump to the higher presets before even trying out the "low" ones. For interiors like this one, "Low" should indeed be good.
-
- Posts: 120
- Joined: Wed Apr 04, 2012 8:26 am
- SketchUp: 2018
- Location: Poland
- Contact:
Re: Low render preset
Exploring further advantages of biased presets. Below Living Room rendered with Medium+ and DOF in Post Pro using Depth Render
Re: Low render preset
Not bad for an hour of rendering.
The color of the lights could be maybe a little more realistic. In the latest version of V2 you should be able to set the Kelvin temperature for the lighting - this info can be found for the light bulb or the light manufacturer's website. Subject: Color of Lights / Light Render Speed Comparison
The color of the lights could be maybe a little more realistic. In the latest version of V2 you should be able to set the Kelvin temperature for the lighting - this info can be found for the light bulb or the light manufacturer's website. Subject: Color of Lights / Light Render Speed Comparison
-
- Posts: 120
- Joined: Wed Apr 04, 2012 8:26 am
- SketchUp: 2018
- Location: Poland
- Contact:
Re: Low render preset
Thanks Fletch. That is what i've done. I was a little bit surprised, but afterwards i accepted results.
-
- Posts: 120
- Joined: Wed Apr 04, 2012 8:26 am
- SketchUp: 2018
- Location: Poland
- Contact:
Re: Low render preset
It took about 5 minut (8 cores) to render each of the images below. The more I know it, the more I like it.
Does anyone know a proven way to simulate daylight in low presets ?
Does anyone know a proven way to simulate daylight in low presets ?
Re: Low render preset
Does anyone know a proven way to simulate daylight in low presets ?
- Turn ON physical sky with sun at power/intensity/strength of 4 or 5 (default sun/sky is perfect.)
- Use Architectural Glass template
- Be sure that sun shadows in SketchUp are where you want them before you render
- Set sky type to Spherical, load a treeline spherical sky image, like the ones available for free in the Red Carpet Resources here on the forum
Increase intensity of sky a little to simulate that it's outside exposure, while you are inside the building. (If default intensity is 1.0, try 2.0)
Who is online
Users browsing this forum: Bing [Bot] and 17 guests