Twilight Render User Forum

Hi All,

Check out the GE Lightning Tools and Software web-site, where you can find many useful resources regarding IES lights...

In particular I recommend that you scroll down to the bottom of the site, where you can download and install the GE Light*Beams 3.0, which is a free application you can use to preview IES lights...
You can also create your own IES libraries and export them to be used in Twilight...

Lacyt wrote:Lets you ---

• choose any .ies light you want to preview
  tweak the angle
  set the wall height
  set distance from walls
  set number of lights you want to use
  set distance between the fixtures.

Shows you the type of fixture your chosen bulb is meant for spot, flouresent tube, etc..

Then see how your light will look real-time on the floor, on the wall, on both.

Hope many of you will find this small program handy...

Thank you Frederick

Thanks very much, nice heads up.



http://www.gelighting.com/LightingWeb/n ... d-ballast/

Above link does not work anymore.

Working link is: https://products.currentbyge.com/lighting-tools