Perforated Metal
-
- Posts: 650
- Joined: Thu Sep 03, 2009 2:26 pm
- SketchUp: SU8 to SU2019 Pro
- Location: Adelaide, South Australia
- Contact:
Perforated Metal
I have a project which will be using perforated metal screens with a printed image similar to those shown on this link http://www.locker.com.au/architectural/pic-perf.html
Creating a perforated metal by modelling it isn't an option because SketchUp simply can't handle it. There is a perforated metal in Kerkythea, but it isn't what I want, unless there is way to adapt it.
Anyhow, if anyone has any bright ideas I would appreciate it.
Cheers,
Gareth
Creating a perforated metal by modelling it isn't an option because SketchUp simply can't handle it. There is a perforated metal in Kerkythea, but it isn't what I want, unless there is way to adapt it.
Anyhow, if anyone has any bright ideas I would appreciate it.
Cheers,
Gareth
Re: Perforated Metal
Gareth I can't see exactly how the grid is made (too small images) and sorry for the quite rough image, it was made really quickly. Anyway if you need something like this:
Tis is how the material is made: In this way the grid mask is unrelated from the image and you can change or scale the grid texture while the image will remain the same size.
Of course you need to place the texture correctly in Sketchup. Hope this helps.
it is pretty simple with a layered material in Kerkythea.Tis is how the material is made: In this way the grid mask is unrelated from the image and you can change or scale the grid texture while the image will remain the same size.
Of course you need to place the texture correctly in Sketchup. Hope this helps.
Re: Perforated Metal
There is nothing serious. Possible and in any other way
- Attachments
-
- perf.jpg (310.5 KiB) Viewed 13787 times
-
- Posts: 650
- Joined: Thu Sep 03, 2009 2:26 pm
- SketchUp: SU8 to SU2019 Pro
- Location: Adelaide, South Australia
- Contact:
Re: Perforated Metal
Thanks massimo and alvydas.....but what you are suggesting is exactly what i was afraid was coming my way...!!
...i simply don't grasp those concepts (i am a 'Hit and Run' renderer...!!)
...but i guess it's time for me to get my head down and bum up and learn...
You have both been very helpful, thank you.....i'll try and give it a shot..!
Footnote : i shudder when i see the word 'Map' appear......and when it is prefixed by either 'Normal', 'Diffuse', 'Specular' or 'Clip' i get scared and watch TV instead....!!!
...i simply don't grasp those concepts (i am a 'Hit and Run' renderer...!!)
...but i guess it's time for me to get my head down and bum up and learn...
You have both been very helpful, thank you.....i'll try and give it a shot..!
Footnote : i shudder when i see the word 'Map' appear......and when it is prefixed by either 'Normal', 'Diffuse', 'Specular' or 'Clip' i get scared and watch TV instead....!!!
Re: Perforated Metal
Sorry, that seems so difficult for you. But you have to solve task. Sketchup also has terms such as mesh, edge, face, weld, explode. Sketchup very difficult? Wishing success and patience.
-
- Posts: 650
- Joined: Thu Sep 03, 2009 2:26 pm
- SketchUp: SU8 to SU2019 Pro
- Location: Adelaide, South Australia
- Contact:
Re: Perforated Metal
hi alvydas......hey it's not your fault i'm dumb...!!....you'd probably laugh if you knew how much i struggle with some of those concepts
what i find intimidating is that you guys find it so easy....after all, look how quickly you and massimo arrived at a solution....in the meantime, i have spent the past couple of hours Googling Clip Maps, Diffuse Maps and Specular Maps and i am still none the wiser and just as confused...!!
you are absolutely correct of course, i have to solve the task....
....how about you come and work for me and then i wouldn't have to bother with this stuff...?!!
what i find intimidating is that you guys find it so easy....after all, look how quickly you and massimo arrived at a solution....in the meantime, i have spent the past couple of hours Googling Clip Maps, Diffuse Maps and Specular Maps and i am still none the wiser and just as confused...!!
you are absolutely correct of course, i have to solve the task....
....how about you come and work for me and then i wouldn't have to bother with this stuff...?!!
Re: Perforated Metal
..but what you are suggesting is exactly what i was afraid was coming my way...!!
i shudder when i see the word 'Map' appear......and when it is prefixed by either 'Normal', 'Diffuse', 'Specular' or 'Clip' i get scared and watch TV instead....!!!
-
- Posts: 650
- Joined: Thu Sep 03, 2009 2:26 pm
- SketchUp: SU8 to SU2019 Pro
- Location: Adelaide, South Australia
- Contact:
Re: Perforated Metal
hi massimo.....mate, i figured that would make you chuckle...!!
Re: Perforated Metal
Ok, I'm serious now...Don't hesitate asking for help if you need.
-
- Posts: 650
- Joined: Thu Sep 03, 2009 2:26 pm
- SketchUp: SU8 to SU2019 Pro
- Location: Adelaide, South Australia
- Contact:
Re: Perforated Metal
thanks mate.....but you might regret it if i start asking questions...!!
....i might leave it until the weekend when i am under less pressure and give it a try
....i might leave it until the weekend when i am under less pressure and give it a try
Who is online
Users browsing this forum: No registered users and 44 guests